We recommend that the bracket should be connected to ground, which can be
the battery or power source negative terminal. This provides protection from
electrostatic discharges. Do this by connecting a grounding strap under one of the
mounting bracket screws.
Upon receiving power, the device automatically starts as shown by the flashing
LEDs. If it does not turn on, see that the:
• Power connector is plugged in
• Power cable is connected to power (line or battery power)
• Power is turned on or that the battery is fully charged
• Ignition Sense (pin 3) is connected to the battery or power source (see
Power
Connector Description on page 15 for details)
After the initial power up, to see if the device is properly connected and operating
correctly:
1. In the laptop connected to the device, open a web browser.
2. In the browser’s address bar, enter the IP address:
http://192.168.13.31:9191.
3. The ACEmanager login screen appears. Enter your user name and
password. The administrator user name is user and password is 12345.
Commentaires sur ces manuels